When hanging doors, it is important to ensure that they are hung properly, so that they can swing open and shut with no problem. If you are not sure how to hang a door, experts like contractors Aurora IL can hang doors for you to ensure proper functioning. While it might be easier to hire out the job, you can easily learn how to do it yourself with these easy-to-follow steps.
Step 1: Ordering the Door with Options
When placing your order for a pre-hung door, you will have a few options, such as, right- or left-hand swing, as well as the option to have the manufacturer drill the holes for the locksets. Some units will arrive with a brace to keep the door and frame aligned. Keep these braces on the door until the door is plumbed, shimmed, and secured into place.
Step 2: Trim Door Opening
In some cases, you’ll have to trim away any excess drywall to ensure that the door will hang plumb against the frame.
Step 3: Check Space for Level
Check that the floor below the door is level. Mark any shims that are needed. Perform the same process for the shims along the door jamb.
Step 4: Cut Down Door
Cut the door down to the appropriate length. Make sure to measure twice and cut once.
Step 5: Prepare Door
Remove any packing materials that come on the pre-hung door, with the exception of the braces.
Step 6: Position Door
Place the door inside the prepared opening, and position the door so that it is plumb and able to swing open.
Step 7: Secure Jamb
With the door in the correct position and level, secure the jamb with nails along the length of the jamb.
Step 8: Check Door for Gaps and Adjust
Use a straight edge to check the door opening. Make sure that there is enough room to open and close the door. Check for gaps above the door, and add shims as necessary to make the door level.
Step 9: Nail Door in Place
Check the center shims and the gap to make sure the door is plumb. Nail the door in place, from the jabs through the shims.
Step 10: Check the Door
Check the door to make sure that it opens and shuts properly. Make adjustments as needed by using a sledgehammer and very gently tapping.
Once the door is hanging correctly, take a step back and admire your handiwork! And for those who are still a little unsure if they want to undertake the task of hanging a pre-hung door, you can hire contractors Aurora IL to ensure that the job is done quickly and correctly.